Study LightsStudy Lights

Blog Details

Mikrotik Certification example test

Certification example test


1. What protocol does ping use?

2. Collisions are possible in full-duplex Ethernet networks

3. MAC layer by OSI model is also known as

4. The network address is

5. Select valid subnet masks:

6. What is term for the hardware coded address found on an interface?

7. You have a router with configuration
– Public IP :202.168.125.45/24
– Default gateway:202.168.125.1
– DNS server: 248.115.148.136, 248.115.148.137
– Local IP: 192.168.2.1/24

Mark the correct configuration on client PC to access to the Internet


8. How many IP addresses can one find in the header of an IP packet?

9. How many layers does Open Systems Interconnection model have?

10. Select valid MAC-address

11. How many usable IP addresses are there in a 20-bit subnet?

12. Which computers would be able to communicate directly (without any routers involved):

13. Which of the following are valid IP addresses?

14. A network ready device is directly connected to a MikroTik RouterBOARD with a correct U.T.P. RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.70 using a subnet mask of 255.255.255.252. What will be a valid IPv4 address for the RouterBOARD 750 for a successful connection to the device?

15. In MikroTik RouterOS, Layer-3 communication between 2 hosts can be achieved by using an address subnet of:

16. The basic unit of a physical network (OSI Layer 1) is the:

17. Select which of the following are ‘Public IP addresses’:

18. There’s an IP address 15.242.55.62 with a subnet mask 255.255.255.224 (/27). Please choose all valid host address range within the same subnet.

19. Which of the following protocols / port s are used for SNMP. (Simple Network Managemnt Protocol)

20. Which of the following is NOT a valid MAC Address?

1 Comment

  • Md.Shahinur Rahaman

    November 27, 2022 - 11:26 am

    I am very happy For MikroTik

Leave A Comment